Today’s blog is the 14th in our series of posts where we share drawings for the White Horse CAD Wobbler Engine. This week we will look at the Wobbler Engine Drive Shaft.

Next week we will look at the Wobbler Engine Drive Shaft Key.

Let’s look at the Wobbler Engine Drive Shaft in a little more detail. If you would like to refer to the PDF engineering drawing, it can be found by clicking here… P9999-11105_Rev 1

The Drive Shaft is a relatively simple component. Its purpose is to support the counterbalance and flywheel. The piston supplies drive to the shaft via the counterbalance, which helps to keep the engine in motion. The flywheel allows the drive to be taken off via a belt to drive other equipment.

This project has never been made. For that reason, White Horse CAD cannot offer any warranty or guarantee that the plans can be used to build a working engine.
This series of engineering drawings is intended to demonstrate capability in using SolidWorks. If anyone manufactures a version of this engine White Horse CAD shall not be held responsible for errors or omissions in the drawings

Don’t miss the next in the series sign up here
Have a project you would like to discuss?… Contact us here

Categories: 3D Design